sane-canon630u

sane-canon630u(5)        SANE Scanner Access Now Easy        sane-canon630u(5)

NAME
       sane-canon630u - SANE backend for the Canon 630u USB flatbed scanner

DESCRIPTION
       The  sane-canon630u library implements a SANE (Scanner Access Now Easy)
       backend that provides access to the following Canon flatbed scanners:

              CanoScan 630u
              CanoScan 636u

       Color scanning is supported at 75, 150, 300, and 600 dpi, and gamma and
       analog gain are adjustable.

       TESTERS  ARE WELCOME. Send your bug reports and comments to Nathan Rut-
       man <nthn1@yahoo.com>

CONFIGURATION
       The contents of the canon630u.conf file is a list of device names  that
       correspond  to Canon USB scanners.  Empty lines and lines starting with
       a hash mark (#) are ignored.  Only one device name  can  be  listed  in
       canon630u.conf.   The  program  sane-find-scanner helps to find out the
       correct device. Under Linux, such a device name could be /dev/usb/scan-
       ner0 for example.  See sane-usb(5) for details.

       This  product-specific  scanner  driver uses the lower-level kernel USB
       driver    "scanner".     Check    for     "Driver=usbscanner"     under
       /proc/bus/usb/devices.  If "Driver=(none)", try forcing it with "insmod
       scanner vendor=0x04a9 product=0x2204"

NOTES
       Due to Canon's unwillingness to  provide  scanner  documentation,  this
       software was developed by analyzing the USB traffic of the Windows 2000
       driver.  So things like the calibration procedure I kind of made up; it
       seems to work for my scanner.  If you have complaints, let me know.

       This  driver  requires the ability to send USB Control Messages, avail-
       able in kernel 2.4.12 or later.

       Some users have reported that this driver doesn't work  at  all.   This
       seems  to  be a hardware specific issue, although I don't know what ex-
       actly the problem is.  If you are having problems, please send  me  the
       info  in  /proc/bus/usb/devices, /proc/pci, the kernel scanner.c driver
       version  from  /var/log/messages,  and  the   output   from   "SANE_DE-
       BUG_CANON630U=12 scanimage > /dev/null"

FILES
       @CONFIGDIR@/canon630u.conf
              The   backend   configuration  file  (see  also  description  of
              SANE_CONFIG_DIR below).

       @LIBDIR@/libsane-canon630u.a
              The static library implementing this backend.

       @LIBDIR@/libsane-canon630u.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

       /tmp/canon.cal
              The  calibration  file used to normalize pixel brightness.  This
              is calculated every time the scanner is first used after it  has
              lost power.  Deleting this file will force recalibration.

ENVIRONMENT
       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  Under UNIX, the directories
              are  separated  by a colon (`:'), under OS/2, they are separated
              by a semi-colon (`;').  If this variable is not set, the config-
              uration  file is searched in two default directories: first, the
              current working directory (".") and then in @CONFIGDIR@.  If the
              value  of the environment variable ends with the directory sepa-
              rator character, then the default directories are searched after
              the  explicitly  specified  directories.   For  example, setting
              SANE_CONFIG_DIR to "/tmp/config:" would  result  in  directories
              "tmp/config", ".", and "@CONFIGDIR@" being searched (in this or-
              der).

       SANE_DEBUG_CANON630U
              If the library was compiled with debug support enabled, this en-
              vironment  variable  controls  the debug level for this backend.
              Higher debug levels increase the verbosity of the output.

              Example:
              SANE_DEBUG_CANON630U=12 scanimage > /dev/null

SEE ALSO
       sane(7), sane-usb(5), sane-find-scanner(1)
       http://canon-fb630u.sourceforge.net/

AUTHOR
       Nathan Rutman

@PACKAGEVERSION@                  11 Jul 2008                sane-canon630u(5)