daemon

DAEMON(7) daemon DAEMON(7)

NAME
daemon - Writing and packaging system daemons

DESCRIPTION
A daemon is a service process that runs in the background and
supervises the system or provides functionality to other processes.
Traditionally, daemons are implemented following a scheme originating
in SysV Unix. Modern daemons should follow a simpler yet more powerful
scheme (here called "new-style" daemons), as implemented by systemd(1).
This manual page covers both schemes, and in particular includes
recommendations for daemons that shall be included in the systemd init
system.

SysV Daemons
When a traditional SysV daemon starts, it should execute the following
steps as part of the initialization. Note that these steps are
unnecessary for new-style daemons (see below), and should only be
implemented if compatibility with SysV is essential.

1. Close all open file descriptors except standard input, output, and
error (i.e. the first three file descriptors 0, 1, 2). This ensures
that no accidentally passed file descriptor stays around in the
daemon process. On Linux, this is best implemented by iterating
through /proc/self/fd, with a fallback of iterating from file
descriptor 3 to the value returned by getrlimit() for
RLIMIT_NOFILE.

2. Reset all signal handlers to their default. This is best done by
iterating through the available signals up to the limit of _NSIG
and resetting them to SIG_DFL.

3. Reset the signal mask using sigprocmask().

4. Sanitize the environment block, removing or resetting environment
variables that might negatively impact daemon runtime.

5. Call fork(), to create a background process.

6. In the child, call setsid() to detach from any terminal and create
an independent session.

7. In the child, call fork() again, to ensure that the daemon can
never re-acquire a terminal again. (This relevant if the program --
and all its dependencies -- does not carefully specify `O_NOCTTY`
on each and every single `open()` call that might potentially open
a TTY device node.)

8. Call exit() in the first child, so that only the second child (the
actual daemon process) stays around. This ensures that the daemon
process is re-parented to init/PID 1, as all daemons should be.

9. In the daemon process, connect /dev/null to standard input, output,
and error.

10. In the daemon process, reset the umask to 0, so that the file modes
passed to open(), mkdir() and suchlike directly control the access
mode of the created files and directories.

11. In the daemon process, change the current directory to the root
directory (/), in order to avoid that the daemon involuntarily
blocks mount points from being unmounted.

12. In the daemon process, write the daemon PID (as returned by
getpid()) to a PID file, for example /run/foobar.pid (for a
hypothetical daemon "foobar") to ensure that the daemon cannot be
started more than once. This must be implemented in race-free
fashion so that the PID file is only updated when it is verified at
the same time that the PID previously stored in the PID file no
longer exists or belongs to a foreign process.

13. In the daemon process, drop privileges, if possible and applicable.

14. From the daemon process, notify the original process started that
initialization is complete. This can be implemented via an unnamed
pipe or similar communication channel that is created before the
first fork() and hence available in both the original and the
daemon process.

15. Call exit() in the original process. The process that invoked the
daemon must be able to rely on that this exit() happens after
initialization is complete and all external communication channels
are established and accessible.

The BSD daemon() function should not be used, as it implements only a
subset of these steps.

A daemon that needs to provide compatibility with SysV systems should
implement the scheme pointed out above. However, it is recommended to
make this behavior optional and configurable via a command line
argument to ease debugging as well as to simplify integration into
systems using systemd.

New-Style Daemons
Modern services for Linux should be implemented as new-style daemons.
This makes it easier to supervise and control them at runtime and
simplifies their implementation.

For developing a new-style daemon, none of the initialization steps
recommended for SysV daemons need to be implemented. New-style init
systems such as systemd make all of them redundant. Moreover, since
some of these steps interfere with process monitoring, file descriptor
passing and other functionality of the init system, it is recommended
not to execute them when run as new-style service.

Note that new-style init systems guarantee execution of daemon
processes in a clean process context: it is guaranteed that the
environment block is sanitized, that the signal handlers and mask is
reset and that no left-over file descriptors are passed. Daemons will
be executed in their own session, with standard input connected to
/dev/null and standard output/error connected to the systemd-
journald.service(8) logging service, unless otherwise configured. The
umask is reset.

It is recommended for new-style daemons to implement the following:

1. If SIGTERM is received, shut down the daemon and exit cleanly.

2. If SIGHUP is received, reload the configuration files, if this
applies.

3. Provide a correct exit code from the main daemon process, as this
is used by the init system to detect service errors and problems.
It is recommended to follow the exit code scheme as defined in the
LSB recommendations for SysV init scripts[1].

4. If possible and applicable, expose the daemon's control interface
via the D-Bus IPC system and grab a bus name as last step of
initialization.

5. For integration in systemd, provide a .service unit file that
carries information about starting, stopping and otherwise
maintaining the daemon. See systemd.service(5) for details.

6. As much as possible, rely on the init system's functionality to
limit the access of the daemon to files, services and other
resources, i.e. in the case of systemd, rely on systemd's resource
limit control instead of implementing your own, rely on systemd's
privilege dropping code instead of implementing it in the daemon,
and similar. See systemd.exec(5) for the available controls.

7. If D-Bus is used, make your daemon bus-activatable by supplying a
D-Bus service activation configuration file. This has multiple
advantages: your daemon may be started lazily on-demand; it may be
started in parallel to other daemons requiring it -- which
maximizes parallelization and boot-up speed; your daemon can be
restarted on failure without losing any bus requests, as the bus
queues requests for activatable services. See below for details.

8. If your daemon provides services to other local processes or remote
clients via a socket, it should be made socket-activatable
following the scheme pointed out below. Like D-Bus activation, this
enables on-demand starting of services as well as it allows
improved parallelization of service start-up. Also, for state-less
protocols (such as syslog, DNS), a daemon implementing socket-based
activation can be restarted without losing a single request. See
below for details.

9. If applicable, a daemon should notify the init system about startup
completion or status updates via the sd_notify(3) interface.

10. Instead of using the syslog() call to log directly to the system
syslog service, a new-style daemon may choose to simply log to
standard error via fprintf(), which is then forwarded to syslog by
the init system. If log levels are necessary, these can be encoded
by prefixing individual log lines with strings like "<4>" (for log
level 4 "WARNING" in the syslog priority scheme), following a
similar style as the Linux kernel's printk() level system. For
details, see sd-daemon(3) and systemd.exec(5).

11. As new-style daemons are invoked without a controlling TTY (but as
their own session leaders) care should be taken to always specify
`O_NOCTTY` on `open()` calls that possibly reference a TTY device
node, so that no controlling TTY is accidentally acquired.

These recommendations are similar but not identical to the Apple MacOS
X Daemon Requirements[2].

ACTIVATION
New-style init systems provide multiple additional mechanisms to
activate services, as detailed below. It is common that services are
configured to be activated via more than one mechanism at the same
time. An example for systemd: bluetoothd.service might get activated
either when Bluetooth hardware is plugged in, or when an application
accesses its programming interfaces via D-Bus. Or, a print server
daemon might get activated when traffic arrives at an IPP port, or when
a printer is plugged in, or when a file is queued in the printer spool
directory. Even for services that are intended to be started on system
bootup unconditionally, it is a good idea to implement some of the
various activation schemes outlined below, in order to maximize
parallelization. If a daemon implements a D-Bus service or listening
socket, implementing the full bus and socket activation scheme allows
starting of the daemon with its clients in parallel (which speeds up
boot-up), since all its communication channels are established already,
and no request is lost because client requests will be queued by the
bus system (in case of D-Bus) or the kernel (in case of sockets) until
the activation is completed.

Activation on Boot
Old-style daemons are usually activated exclusively on boot (and
manually by the administrator) via SysV init scripts, as detailed in
the LSB Linux Standard Base Core Specification[1]. This method of
activation is supported ubiquitously on Linux init systems, both
old-style and new-style systems. Among other issues, SysV init scripts
have the disadvantage of involving shell scripts in the boot process.
New-style init systems generally employ updated versions of activation,
both during boot-up and during runtime and using more minimal service
description files.

In systemd, if the developer or administrator wants to make sure that a
service or other unit is activated automatically on boot, it is
recommended to place a symlink to the unit file in the .wants/
directory of either multi-user.target or graphical.target, which are
normally used as boot targets at system startup. See systemd.unit(5)
for details about the .wants/ directories, and systemd.special(7) for
details about the two boot targets.

Socket-Based Activation
In order to maximize the possible parallelization and robustness and
simplify configuration and development, it is recommended for all
new-style daemons that communicate via listening sockets to employ
socket-based activation. In a socket-based activation scheme, the
creation and binding of the listening socket as primary communication
channel of daemons to local (and sometimes remote) clients is moved out
of the daemon code and into the init system. Based on per-daemon
configuration, the init system installs the sockets and then hands them
off to the spawned process as soon as the respective daemon is to be
started. Optionally, activation of the service can be delayed until the
first inbound traffic arrives at the socket to implement on-demand
activation of daemons. However, the primary advantage of this scheme is
that all providers and all consumers of the sockets can be started in
parallel as soon as all sockets are established. In addition to that,
daemons can be restarted with losing only a minimal number of client
transactions, or even any client request at all (the latter is
particularly true for state-less protocols, such as DNS or syslog),
because the socket stays bound and accessible during the restart, and
all requests are queued while the daemon cannot process them.

New-style daemons which support socket activation must be able to
receive their sockets from the init system instead of creating and
binding them themselves. For details about the programming interfaces
for this scheme provided by systemd, see sd_listen_fds(3) and sd-
daemon(3). For details about porting existing daemons to socket-based
activation, see below. With minimal effort, it is possible to implement
socket-based activation in addition to traditional internal socket
creation in the same codebase in order to support both new-style and
old-style init systems from the same daemon binary.

systemd implements socket-based activation via .socket units, which are
described in systemd.socket(5). When configuring socket units for
socket-based activation, it is essential that all listening sockets are
pulled in by the special target unit sockets.target. It is recommended
to place a WantedBy=sockets.target directive in the "[Install]" section
to automatically add such a dependency on installation of a socket
unit. Unless DefaultDependencies=no is set, the necessary ordering
dependencies are implicitly created for all socket units. For more
information about sockets.target, see systemd.special(7). It is not
necessary or recommended to place any additional dependencies on socket
units (for example from multi-user.target or suchlike) when one is
installed in sockets.target.

Bus-Based Activation
When the D-Bus IPC system is used for communication with clients,
new-style daemons should employ bus activation so that they are
automatically activated when a client application accesses their IPC
interfaces. This is configured in D-Bus service files (not to be
confused with systemd service unit files!). To ensure that D-Bus uses
systemd to start-up and maintain the daemon, use the SystemdService=
directive in these service files to configure the matching systemd
service for a D-Bus service. e.g.: For a D-Bus service whose D-Bus
activation file is named org.freedesktop.RealtimeKit.service, make sure
to set SystemdService=rtkit-daemon.service in that file to bind it to
the systemd service rtkit-daemon.service. This is needed to make sure
that the daemon is started in a race-free fashion when activated via
multiple mechanisms simultaneously.

Device-Based Activation
Often, daemons that manage a particular type of hardware should be
activated only when the hardware of the respective kind is plugged in
or otherwise becomes available. In a new-style init system, it is
possible to bind activation to hardware plug/unplug events. In systemd,
kernel devices appearing in the sysfs/udev device tree can be exposed
as units if they are tagged with the string "systemd". Like any other
kind of unit, they may then pull in other units when activated (i.e.
plugged in) and thus implement device-based activation. systemd
dependencies may be encoded in the udev database via the SYSTEMD_WANTS=
property. See systemd.device(5) for details. Often, it is nicer to pull
in services from devices only indirectly via dedicated targets.
Example: Instead of pulling in bluetoothd.service from all the various
bluetooth dongles and other hardware available, pull in
bluetooth.target from them and bluetoothd.service from that target.
This provides for nicer abstraction and gives administrators the option
to enable bluetoothd.service via controlling a bluetooth.target.wants/
symlink uniformly with a command like enable of systemctl(1) instead of
manipulating the udev ruleset.

Path-Based Activation
Often, runtime of daemons processing spool files or directories (such
as a printing system) can be delayed until these file system objects
change state, or become non-empty. New-style init systems provide a way
to bind service activation to file system changes. systemd implements
this scheme via path-based activation configured in .path units, as
outlined in systemd.path(5).

Timer-Based Activation
Some daemons that implement clean-up jobs that are intended to be
executed in regular intervals benefit from timer-based activation. In
systemd, this is implemented via .timer units, as described in
systemd.timer(5).

Other Forms of Activation
Other forms of activation have been suggested and implemented in some
systems. However, there are often simpler or better alternatives, or
they can be put together of combinations of the schemes above. Example:
Sometimes, it appears useful to start daemons or .socket units when a
specific IP address is configured on a network interface, because
network sockets shall be bound to the address. However, an alternative
to implement this is by utilizing the Linux IP_FREEBIND socket option,
as accessible via FreeBind=yes in systemd socket files (see
systemd.socket(5) for details). This option, when enabled, allows
sockets to be bound to a non-local, not configured IP address, and
hence allows bindings to a particular IP address before it actually
becomes available, making such an explicit dependency to the configured
address redundant. Another often suggested trigger for service
activation is low system load. However, here too, a more convincing
approach might be to make proper use of features of the operating
system, in particular, the CPU or I/O scheduler of Linux. Instead of
scheduling jobs from userspace based on monitoring the OS scheduler, it
is advisable to leave the scheduling of processes to the OS scheduler
itself. systemd provides fine-grained access to the CPU and I/O
schedulers. If a process executed by the init system shall not
negatively impact the amount of CPU or I/O bandwidth available to other
processes, it should be configured with CPUSchedulingPolicy=idle and/or
IOSchedulingClass=idle. Optionally, this may be combined with
timer-based activation to schedule background jobs during runtime and
with minimal impact on the system, and remove it from the boot phase
itself.

INTEGRATION WITH SYSTEMD
Writing systemd Unit Files
When writing systemd unit files, it is recommended to consider the
following suggestions:

1. If possible, do not use the Type=forking setting in service files.
But if you do, make sure to set the PID file path using PIDFile=.
See systemd.service(5) for details.

2. If your daemon registers a D-Bus name on the bus, make sure to use
Type=dbus in the service file if possible.

3. Make sure to set a good human-readable description string with
Description=.

4. Do not disable DefaultDependencies=, unless you really know what
you do and your unit is involved in early boot or late system
shutdown.

5. Normally, little if any dependencies should need to be defined
explicitly. However, if you do configure explicit dependencies,
only refer to unit names listed on systemd.special(7) or names
introduced by your own package to keep the unit file operating
system-independent.

6. Make sure to include an "[Install]" section including installation
information for the unit file. See systemd.unit(5) for details. To
activate your service on boot, make sure to add a
WantedBy=multi-user.target or WantedBy=graphical.target directive.
To activate your socket on boot, make sure to add
WantedBy=sockets.target. Usually, you also want to make sure that
when your service is installed, your socket is installed too, hence
add Also=foo.socket in your service file foo.service, for a
hypothetical program foo.

Installing systemd Service Files
At the build installation time (e.g. make install during package
build), packages are recommended to install their systemd unit files in
the directory returned by pkg-config systemd
--variable=systemdsystemunitdir (for system services) or pkg-config
systemd --variable=systemduserunitdir (for user services). This will
make the services available in the system on explicit request but not
activate them automatically during boot. Optionally, during package
installation (e.g. rpm -i by the administrator), symlinks should be
created in the systemd configuration directories via the enable command
of the systemctl(1) tool to activate them automatically on boot.

Packages using autoconf(1) are recommended to use a configure script
excerpt like the following to determine the unit installation path
during source configuration:

PKG_PROG_PKG_CONFIG
AC_ARG_WITH([systemdsystemunitdir],
[AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files])],,
[with_systemdsystemunitdir=auto])
AS_IF([test "x$with_systemdsystemunitdir" = "xyes" -o "x$with_systemdsystemunitdir" = "xauto"], [
def_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)

AS_IF([test "x$def_systemdsystemunitdir" = "x"],
[AS_IF([test "x$with_systemdsystemunitdir" = "xyes"],
[AC_MSG_ERROR([systemd support requested but pkg-config unable to query systemd package])])
with_systemdsystemunitdir=no],
[with_systemdsystemunitdir="$def_systemdsystemunitdir"])])
AS_IF([test "x$with_systemdsystemunitdir" != "xno"],
[AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])])
AM_CONDITIONAL([HAVE_SYSTEMD], [test "x$with_systemdsystemunitdir" != "xno"])

This snippet allows automatic installation of the unit files on systemd
machines, and optionally allows their installation even on machines
lacking systemd. (Modification of this snippet for the user unit
directory is left as an exercise for the reader.)

Additionally, to ensure that make distcheck continues to work, it is
recommended to add the following to the top-level Makefile.am file in
automake(1)-based projects:

AM_DISTCHECK_CONFIGURE_FLAGS = \
--with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)

Finally, unit files should be installed in the system with an automake
excerpt like the following:

if HAVE_SYSTEMD
systemdsystemunit_DATA = \
foobar.socket \
foobar.service
endif

In the rpm(8) .spec file, use snippets like the following to
enable/disable the service during installation/deinstallation. This
makes use of the RPM macros shipped along systemd. Consult the
packaging guidelines of your distribution for details and the
equivalent for other package managers.

At the top of the file:

BuildRequires: systemd
%{?systemd_requires}

And as scriptlets, further down:

%post
%systemd_post foobar.service foobar.socket

%preun
%systemd_preun foobar.service foobar.socket

%postun
%systemd_postun

If the service shall be restarted during upgrades, replace the
"%postun" scriptlet above with the following:

%postun
%systemd_postun_with_restart foobar.service

Note that "%systemd_post" and "%systemd_preun" expect the names of all
units that are installed/removed as arguments, separated by spaces.
"%systemd_postun" expects no arguments. "%systemd_postun_with_restart"
expects the units to restart as arguments.

To facilitate upgrades from a package version that shipped only SysV
init scripts to a package version that ships both a SysV init script
and a native systemd service file, use a fragment like the following:

%triggerun -- foobar < 0.47.11-1
if /sbin/chkconfig --level 5 foobar ; then
/bin/systemctl --no-reload enable foobar.service foobar.socket >/dev/null 2>&1 || :
fi

Where 0.47.11-1 is the first package version that includes the native
unit file. This fragment will ensure that the first time the unit file
is installed, it will be enabled if and only if the SysV init script is
enabled, thus making sure that the enable status is not changed. Note
that chkconfig is a command specific to Fedora which can be used to
check whether a SysV init script is enabled. Other operating systems
will have to use different commands here.

PORTING EXISTING DAEMONS
Since new-style init systems such as systemd are compatible with
traditional SysV init systems, it is not strictly necessary to port
existing daemons to the new style. However, doing so offers additional
functionality to the daemons as well as simplifying integration into
new-style init systems.

To port an existing SysV compatible daemon, the following steps are
recommended:

1. If not already implemented, add an optional command line switch to
the daemon to disable daemonization. This is useful not only for
using the daemon in new-style init systems, but also to ease
debugging.

2. If the daemon offers interfaces to other software running on the
local system via local AF_UNIX sockets, consider implementing
socket-based activation (see above). Usually, a minimal patch is
sufficient to implement this: Extend the socket creation in the
daemon code so that sd_listen_fds(3) is checked for already passed
sockets first. If sockets are passed (i.e. when sd_listen_fds()
returns a positive value), skip the socket creation step and use
the passed sockets. Secondly, ensure that the file system socket
nodes for local AF_UNIX sockets used in the socket-based activation
are not removed when the daemon shuts down, if sockets have been
passed. Third, if the daemon normally closes all remaining open
file descriptors as part of its initialization, the sockets passed
from the init system must be spared. Since new-style init systems
guarantee that no left-over file descriptors are passed to executed
processes, it might be a good choice to simply skip the closing of
all remaining open file descriptors if sockets are passed.

3. Write and install a systemd unit file for the service (and the
sockets if socket-based activation is used, as well as a path unit
file, if the daemon processes a spool directory), see above for
details.

4. If the daemon exposes interfaces via D-Bus, write and install a
D-Bus activation file for the service, see above for details.

PLACING DAEMON DATA
It is recommended to follow the general guidelines for placing package
files, as discussed in file-hierarchy(7).

SEE ALSO
systemd(1), sd-daemon(3), sd_listen_fds(3), sd_notify(3), daemon(3),
systemd.service(5), file-hierarchy(7)

NOTES
1. LSB recommendations for SysV init scripts
http://refspecs.linuxbase.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html

2. Apple MacOS X Daemon Requirements
https://developer.apple.com/library/mac/documentation/MacOSX/Conceptual/BPSystemStartup/Chapters/CreatingLaunchdJobs.html

systemd 245 DAEMON(7)

daemon

Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2024 Hurricane Electric. All Rights Reserved.